New Parts for Old Telephones
Here you can find new or reproduction parts for your old telephone. New parts are at times more cost affective than old ones. If you are looking for a part that you do not see here please email us as it would be difficult to have every part on the web(But we are trying). This is just a small sample of the telephone parts we have on hand. We would like for you to email us when you have a request. We will get back with you as soon as we can. We have a large assortment of both old and new parts. We can also repair most any broken or damaged part. We have a machine shop to handle all of your metal or wood repair problems. After collecting telephones for almost 20 years I do seem to end up with some extra parts. Here are a few other pages with telephone parts or pieces.
The Following links are to pages with old parts!
Please feel free to let
me know if you have any questions that I might answer.
Wanted!
Old receivers or
Mouthpieces. Don't throw them away! I will give you credit or will pay you for
these pieces. If you have any spare parts I would like to buy them too!
All items maybe be purchased with a credit card at Paypal by just clicking the link under the item or by emailing me at IBuy@oldtelephone.com and requesting the parts. I will email you back a bill and you may pay with a postal money order or other type of money order.
We Charge for shipping. Most small items $4.00 plus $.50 handling. Anything over 10 lbs. goes UPS (It is cheaper)
No refunds or returns on any old or new telephone parts! No refunds on miss ordered telephone parts. Send a picture and I will make sure!
|
|
|
|
|
|
 
Nickel plated Brass bells. 2 1/2" $10.00 each Brass 2 1/2" bells you polish or paint As is $6.00 each
|
    
$40.00
|
Long Kellogg
transmitter arm
|
Brass Western Electric Transmitter mount $22.00 Email if you need one!
|
|
Old Corner grommets for old wood telephones
Nickel plated Brass $3.00 each plus shipping
New Brass Grommets $2.00 each
|
 
The same Mag above With a crank!
$115.00 For more old magnetos and information about them! |
    Western Electric 2 bar horse shoe type telephone magneto. The ones that are pictured I am out of at this time, but I now have the same thing in gray! Works and is hot! $100.00 Order a crank too on this page. You will need it!
If you think you want a larger Mag I have
3,4 and 5 bar Mags for sale.
Email the make of phone you need one for and I will make sure I have
one for your phone. If you are interested in old telephone magnetos look
here! |
    
This is a reproduction phony Receiver shell. Use this to replace your old cracked or broken receiver. $55.00 |
 
Have a phone with out a magneto but still want the look of having a crank? Here is a dummy crank holder. Just add your crank and a screw to hold it in and you are set to go. Item Name: Dummy crank holder Item Number: PartsForSale.htm Price: $14.00
|
 
Stromberg Carlson Brass bottom receiver handles. These are replacements for your broken or damaged SC handle. The larger one fits the earlier receiver. $55.00 choice |
|
  
Reproduction Western Electric Receiver Cap. These are nice and will fit most receiver shells including the Leich shells on the right! $32.00
Order both below and save! |
 
Leich Electric receiver shell. These are replacement shells. When I received
these they were wrapped up in old looking tissue paper but I think they are new. Anyway
they look good and work great. Add the cap to the left and order below the cap! |
Replacement Receiver!
Includes both the Western cap and Leich shell above!
Reproduction
Receiver. This great copy was made
off the Automatic Electric receiver with a capsule. No magnet is
needed to give this receiver weight. Great for replacing that lost or
badly damaged receiver.
|
Original Old Receiver Diaphrams. This is the flat metal disk that goes under the cap on a old bi polar receiver. These were still wrapped up when I got them. Some are wrapped and some are not, now. $10.00 each
|
| New Cloth
Handset cords for your old black desk telephones! All are 3 wire and will work on most old hard wired handsets.
Straight Brown Cloth Handset Cord
$24.00
Just in! Western Electric cloth covered handset cords for the Country Junction wall and desk telephones. These cords are 12' long with modular ends. To be used from the phone to the handset. New still in the original package. $30.00
Black Vinyl coil Handset Cord.
This is the thick black cord like the early
rubber cords that were on 202's and 302's of the 1920's-1940's These
will only have 3 wires. $20.50
Brown cloth over plastic modular cord for your converted old
telephones.
6' $24.00
Black cloth over plastic modular cord for your converted old
telephones.
6' $24.00 Black Flat plastic modular cord to connect your old
phone to the modern telephone system. Modular plug on one end and spades on the
other end. $15.00
|
2 Line Cloth covered cordage for your old wood or candlestick telephones.
Cord cut from
large roll 36" long No ends added $18.00
Order
Just received some Old Bulk Cordage. This is just like the original and was made
by one of the largest cord makers. With spades added and cloth pigtails $32.00
Original Old Western Electric Receiver cords. Unused with a great paper tag! $45.00
4 prong plug to modular. Use this
adapter to plug you old phone in the
wall. I only have a few left! Radio shack no longer carries these.
New just in the last of the line cord adapters to modular. $10.00
Amp retainers. Use these to fix your old cords. $2.50 each
Just in Old Brass "J" hooks like what is on the original Old handset cords. New Unused! $2.50 each
Or by the 100 for $35.00
|
    
Old Stromberg Carlson Receiver.
Marked on the top and the cap complete with magnets and diaphragm. |
Old Mag Name plates $10.00 each click here to see more old parts |
Used 1 1/2 Volt Telephone Batteries. These still are holding a charge but I don't know for how long. Only have 2 left. $16.00 each
|
Replacement
hook
Black Crank covers the around the hole that the crank sticks out of $4.00
|
 
Plated Western Electric switch hook cover $8.00
|
|
Old French type Mouthpieces Fit LME and others $28.00 Each Order
|
Bell brackets for old wooden telephones New But with a little rust Made of steel to hold the bells. With bell nuts $6.00 each
|
Western Electric Water release decal copied from an original. $15.00 2 5/8" X 3/4"
Brass Western Electric Name tags $22.00
Brass Kellogg Name tags $18.00
|
 Swedish American telephone Co. Water release decal. Copied from an original. $21.00 Order |
   Old telephone replacement shelves. These are make of quarter sawn white oak. They are prefect copies of the originals. We will need a picture of your old telephone and some special measurements Please Email for instructions. Most shelves are $35.00 You will need to finish to match your old telephone. Sorry we are out of oak at this time! |
We
have begun posting old odd parts on new web pages if you need any odd
parts check them out! OldtelephoneParts
|
| We
have a Kit for those of you who want to build your own old telephone. This kit
will have all the hard to find parts. The common parts like screws,
hinges and other little thing that you can buy at the hardware store are
NOT
included. You will get a Receiver, Cloth Cord, Switch hook and
switch, Transmitter arm Assembly, Mag, Ringer and bells, Crank and other
internal components that and will allow your telephone to
work on today's system. These parts will need to be polished or painted to
your liking as they will be shipped in as I got them condition. Some parts are old and some are new. Wood smith has the plans I have the parts! Do you have the ability? Touchtone $224.00 Dial $214.00 Non Dial $209.00
Here is a picture of their telephone completed! Complete one with my kit and I will post it here!
This phone was built from your kit I purchased last fall. It works great. -Steve TI would recommend that you have all the parts before you start. The plans and the parts may very somewhat. For example, the faceplate for the keypad does not have the same dimensions as the plan and therefore some changes will have to be made to accommodate the available faceplate. The other advise I have is to fully assemble the phone before final finish. Some additional holes will have to be drilled for the placement of the modern components. Once that is done, carefully mark where the wires go and finish the project.
If you need the plans try here! |
We
have just put this Kit together for the "do it yourselfer".
This is similar to what we install in the old wood telephones. I supply
the parts, cords, wires, and other items your will need to convert your
old telephone to work on today's system. I include a wiring diagram for
the parts that are included with the kit. With this kit you will be able
to receive calls but NO calling out. To install this kit you will need
the know how to soldier and stripe and crimp wire. You will need a soldering
iron, screwdriver, wire striper and ohm meter. I will be happy to answer
question through the email but no calls Please! Kit $195.00 plus shipping
For Rotory Dial add $75.00 to dial out For touchtone dial add $100.00 Or send it to me and I will do it for $155.00 plus shipping I can install touchtone on the phones I do!
New old stock networks for converting old phones. I have a schematic that I use that I will email to you when you buy one of these. This network will allow you to use your old phone on today's system. I must warn you Will need some knowledge of basic electrical skills to be able to hook this up. I will NOT help trouble shoot problems that you might run into. $55.00 Item Name: SC Old telephone networkItem Number: SCWoodNetwork Price: $55.00
|
| To order a Parts
Email us on what you may
need We will advise you of our
stock and tell you what the
No refunds or returns on any old or new telephone parts! No refunds on miss ordered telephone parts. Afraid you might order the wrong part! Send a picture and I will make sure!
|
|
